The Duke Company is proud to carry SpecChem products including E-Cure. E-Cure is a concrete curing compound. E-Cure is a leading edge technology, clear concrete curing compound that was developed to cure concrete as well as resolve compatibility issues related to flooring adhesives. E-Cure is a spray applied concrete cure, hardener and dustproofer. E-Cure penetrates and forms a temporary membrane to cure, densify, harden and dustproof concrete essential for proper strength development. E-Cure meets the moisture retention of ASTM C-309 Type 1D, Class B on hard-troweled concrete surfaces. May contribute to LEED credits.

  • Non-yellowing, does not alter natural color of concrete
  • Non-flammable/odorless/VOC Compliant
  • Will not inhibit adhesion of secondary coatings, topping, or adhesives designed for concrete
  • Resists acids, oils, greases, salts and tire marks
  • USDA accepted
  • Certified for use to cure potable water structures
  • Contains 0 VOC’s
  • Tested and certified to the performance requirements of NSF/ANSI 61

 

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

 

Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

 

Features and Benefits
  •  Non-yellowing, does not alter natural color of concrete
  • Non-flammable/odorless/V.O.C. Compliant
  • Will not inhibit adhesion of secondary coatings, topping, or adhesives designed for concrete
  • Resists acids, oils, greases, salts and tire marks
  • U.S.D.A. accepted
  • Certified for use to cure potable water structures
  • Contains zero V.O.C.’s
  • Tested and certified to the performance requirements of NSF/ANSI 61

 

APPLICATION

Over application and puddling may leave white crystals, which must be removed immediately by flushing the surface with water, scrubbing and squeegee clean. May be applied with sprayer, brush or roller. Spraying provides superior results. Application temperatures 40oF to 90oF. Application up to 100°F can be achieved if high humidity and ACI Hot Weather procedures are followed. Protect metal, glass, painted and brick surfaces from ECure. If accidentally misapplied, wash with clean water at once.

COVERAGE

Curing, Hardening and Dustproofing:

  • Hard Troweled Finish: 600-800 sq ft / gal
  • Broom or Float Finish: 300-400 sq ft / gal
  • Rough Finish: 200-300 sq ft / gal
  • Vertical Surface: 400-500 sq ft / gal

The above rates are approximate. Exact coverage depends upon the porosity of the concrete as well as the job requirements. Extend application rate to 1000 sq-ft per gal with the use of a micro-fiber applicator on extremely hard trowelled, burnished concrete floors (ie Wal-Mart, Kohl’s Projects)

Apply immediately after final finishing operations and after the bleed water had receded. The use of a micro-fiber applicator will aid when applying at 800-1000 sq-ft per gal . Over application and puddling may leave white crystals, which must be removed immediately by flushing the surface with water, scrubbing and squeegee clean. May be applied with sprayer, brush or roller. Spraying provides superior results. Application temperatures 40o F to 90o F. Application up to 100°F can be achieved if high humidity and ACI Hot Weather procedures are followed. Protect metal, glass, painted and brick surfaces from ECure. If accidentally misapplied, wash with clean water at once.

 

Download Helpful Information:

Packaging

E-Cure is packaged in:

  • 55 gallon drums
  • 5 gallon pails.


The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski