The Duke Company is proud to carry SpecChem products including LithSeal SC. LithSeal SC is an Lithium Silicate Concrete Sealer/Densifier . LITHSEAL SC is a premium lithium silicate sealer/densifier for concrete surfaces. LITHSEAL SC deeply penetrates and reacts with cured concrete. This reaction produces a calcium silicate hydrate within the concrete pores. Treated surfaces will remain breathable, reduce porosity, reduce dusting, reduce water permeability and increase abrasion resistance. When properly applied,
LithSeal SC will not leave the whitish blush characteristic of other sodium silicate products.

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

 

Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

 

 

 

BENEFITS

  • Reduce application costs with one step low pressure spray application on broom or power trowelled finishes.
  • Achieve architectural finishes, does not contribute to Alkali Surface Reaction (ASR), Will not leave a white surface as compared to other silicate products.
  • Reduce dusting, porosity, water permeability.
  • Improves abrasion resistance, light reflectance and gloss.
  • Deeper penetrating then conventional silicates.
  • Can be used interior and exterior.
  • Fast curing. Ready for traffic in one hour for most floors.
  • Breathable
  • Apply on new or existing concrete
  • Environmentally and economically efficient sealer
  • Great for residential, commercial and industrial concrete floors
  • Single, low maintenance application

 

APPLICATION

Always follow Technical Data sheet instruction and Safety information provided on the MSDS. LITHSEAL SC may be applied on freshly placed concrete after the final finishing and to existing (cured) concrete. Always apply LITHSEAL SC to a clean surface free of cures, bond breakers, oil, dirt, grease or debris. When necessary, clean concrete surfaces with SpecChem Citrus Cleaner and neutralize with a neutral ph
detergent. Thoroughly flush with water.

Application for freshly placed concrete:

After final finishing apply LITHSEAL SC with a quality low pressure sprayer with a fan tip. Uniformly spread the LithSeal SC with a soft broom or microfiber applicator to thoroughly coat the concrete eliminating any puddles or excess. Apply enough material to keep the surface wet for 15-20 minutes. Apply additional LITHSEAL SC to porous areas that dry quickly.

Any excess LithSeal SC that dries on the surface will appear as a dry powder residue and can be removed with a stiff broom, power sweeper, or floor scrubbing machine.

A compatible ASTM C 309 curing compound such as SpecChem “SpecRez” may be applied to finalize the curing process. After the concrete has thoroughly cured, a floor scrubber equipped with a nylo-grit or similar abrasive cleaning pad will remove any residual construction debris, curing compound and further enhance the LithSeal SC surface shine.

Coverage Rates:
Coverage rates will vary with concrete porosity.

Fresh, Uncured, Burnished Concrete…..800-1000ft2/gal
Existing Steel Trowelled Concrete……….400-500ft2/gal.
Existing Float Finished Concrete ………….250-350ft2/gal

Typical Dry time is 1-2 hours

Application for existing concrete:
Confirm removal of all surface contaminants. For best results clean the surface with a 60-100 grit sanding screen or diamond abrasive pad. Remove any dust and residue with a thorough water rinse and scrubber. Water rinse and squeegee surface dry Apply LITHSEAL SC with a quality low pressure sprayer. In a single saturating coat. Uniformly spread the LithSeal SC with a soft broom or microfiber applicator to thoroughly coat the concrete eliminating any puddles or excess. Apply enough material to keep the surface wet for 15-20 minutes. Apply additional LITHSEAL SC to porous areas that dry quickly. Let treated areas dry. Remove any dried powdery residue with a stiff broom or floor scrubbing machine.

 

Download Helpful Information:

Packaging

LithSeal SC is packaged in:

  • 275 gallon totes
  • 55 gallon plastic drums
  • 5 gallon plastic pails


The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski