Atlas Copco LCD 500

Atlas Copco LCD 500

Atlas copco lcd 500

The Atlas Copco LCD 500 core drill is available in Rochester NYIthaca NY and Upstate NY from the Duke Company.

The Atlas Copco hydraulic core drills are both safe and powerful.

Due to the hydraulic control of the drill torque, these core drills give very low kickback should drill bits jam. This helps you to maintain control, even when working on holes of 8 in in diameter and above. Core drills are used by professionals in a wide range of applications including building renovation and utility works. They are relied on to install drainage, sewer and water pipes, plus cable and ventilation ducts where large and deep holes are needed. Core sampling in asphalt roads is another perfect application for this high performing drill.

The core drills offer spark-free operation – since there are no electrical components – and so can be used inside buildings and even underwater. With a standard round, 2.36 in front-end, you can use Atlas Copco core drills with the majority of commonly available drill stands.


Features & benefits

  • High power to weight ratio
  • Low vibrations
  • Low kick-back
  • Hydraulic torque control
  • Fits in standard drill stands
  • Closed hydraulic circuit
  • Comes in carrying steel case as standard


  • Safe handheld drilling in reinforced concrete and asphalt up to 200 mm diameter in confined spaces, for ventilation, heating, gas piping and other installations
  • Works efficient also in underwater applications



Specifications for the Atlas Copco LCD 1500 core drill:


Weight (incl hoses) lb 20
Service weight (incl hoses and Ø 112 mm tool) lb 29
Length (without drill) in 16
Oil flow gpm 5-8
Working pressure psi 1160 – 2495
Revolutions rpm 1,500-2,250
Drill diameter in 1/2 – 3
Thread female (drive shaft) 1 in 1/2 BSP
Vibration level 3 axes (ISO 28927-5), 20 lpm 2 m/s2 2.7
Sound pressure level (ISO 11203) 2 Lp, r=1m dB(A) <70
EHTMA class C/D
Part number 1806 1014 39



















For the best customer service and fastest delivery in Upstate New York, call the Duke Company at (585) 292-9870 (Rochester NY) and (607) 347-4455 (Ithaca / Seneca NY).

Or we can give you a quick quote via our web portal.


*Please note, subject to equipment availability and seasonal demands, specific makes and models of rental equipment may not be available for rent or sale.  The Duke Company will make every attempt to equip you with the right rental equipment and tools that will enable you to accomplish your project goals.  Please contact the Duke Company in Rochester at (585) 292-9870 and Ithaca at (607) 347-4455 to check for the latest availability.





  • Dansville NY
    View Larger Map Dansville NY Looking to Rent Construction Equipment, Buy Building Supplies...
  • Irondequoit NY
    View Larger Map Irondequoit NY – Construction Equipment Rental, Building Supplies & Bulk...
  • Horseheads NY
    Horseheads NY Tool Rental & Building Supplies  Construction Equipment Rental, Heavy Equipment Rental,...
  • Elmira NY
    Elmira, NY – Equipment Rental, Building Supplies & Rock Salt – A to...
  • Binghamton NY
    Binghamton NY Equipment Rental  Construction Equipment Rental, Heavy Equipment Rental, Tool Rental Center...





Facebook  twitter  googleplus  linkedin




The Duke Company
299 Jefferson Road
Rochester, NY 14623
Phone: (585) 292-9870


The Duke Company
7 Hall Road
Ithaca, NY 14850
Phone: (607) 347-4455


The Duke Company
10131 Poags Hole Road
Dansville, NY 14437
Phone: (585) 335-5970