ROCHESTER (585) 292.9870 | ITHACA (607) 347.4455| DANSVILLE (585) 335.5970

Customer Service

You Can Build On

Contact Us?

News & Expert Advice

You are here: Home Tag ‘heavy construction equipment rental’

Flagro FVO 1000TR Indirect Heater | The Duke Company

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

Quote for Rock Salt & Packaged Ice Melts from the Duke Company

Or call the  Duke Company at:

585-292-9870  (Rochester NY)

607-347-4455  (Ithaca NY)

(585) 335-5970 (Dansville NY)

We welcome any questions or concerns you may have regarding your project and equipment rental questions. For example, we recently received a question via our quick quote portal regarding the Wacker Neuson E5000 rentals. We were happy to accommodate his project needs. Call the Duke Company for all your construction equipment needs – including a wide variety of construction equipment rentals including the Wacker Neuson E5000.


 

Tent Heater and Trailer Rental - Flagro FVO 1000TR

 

Specifications:
• Indirect Heater
• Equipped with 2 Flagro FVO-400 indirect heater machines.
• Duct Outlets: available with 4 x 12″ or 2 x 16″.
• Durable trailer mounted heater.
• Engine: equipped with powerful Yanmar / Kubota diesel engines.
• Starter: reliable electric start feature.
• Fuel consumption: 1.08 gallons per hour at full load.
• Run time: the heaters have a 44 hour run time before adding fuel is necessary.
• Generator: equipped with 8kw generator @1,800 RPM. The generator is a single phase, 120v.
• Tool outlet: equipped with one 15 amp GFI outlet.
• Fuel: tank is capable of holding 290 gallons.
• Length: 16 feet.
• Width: 7 feet, 4 inches.
• Height: 6 feet.
• Weight: 4,000 pounds when empty.
• Trailer: DOT approved.

 

Download Helpful Information for the Flagro FVO 1000TR

Operations Manual for Tent Heater and Trailer Rental – Flagro FVO 1000TR

 


Regarding rental equipment:

*Please note, subject to equipment availability and seasonal demands, specific makes and models of rental equipment may not be available for rent or sale.  The Duke Company will make every attempt to equip you with the right rental equipment and tools that will enable you to accomplish your project goals.  Please contact the Duke Company in Rochester at (585) 292-9870, Ithaca at (607) 347-4455 or (585) 335-5970 (Dansville NY) to check for the latest availability.


The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

Quote for Rock Salt & Packaged Ice Melts from the Duke Company

Or call the  Duke Company at:

585-292-9870  (Rochester NY)

607-347-4455  (Ithaca NY)

(585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York including:


Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

Cure & Seal 30 – SpecChem | The Duke Company

The Duke Company is proud to carry SpecChem products including Cure & Seal 30. Cure & Seal 30 is a 30% solids solvent-based cure & seal (ASTM 1315 class B compliant).

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

 


CURE & SEAL 30 is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.

 

APPLICATION

Storage: Store material in the original tightly closed containers. Do not allow the accumulation of water, dirt or other contaminants.

Coverage: Ready to use. Do not dilute. Apply with a sprayer or roller in uniform thin films; spray apply for best results. Two thin coats should be applied. Apply the second coat after the first coat has thoroughly dried. Never apply one heavy coat. Avoid puddles. Apply in accordance with recommended coverage rates.

Curing: 300 – 400 sq ft / gal
Dustproofing and Sealing: 400 – 600 sq ft / gal
Aged concrete: 400 – 600 sq ft / gal

For dustproofing and sealing benefits, apply two coats at 500 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete.

New Concrete: CURE & SEAL 30 should be applied as soon as the surface water has disappeared and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.

Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and incompatible coatings prior to application. An application of CURE & SEAL 30 will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain. CURE & SEAL 30 is compatible with most carpets, tile and floor covering adhesives. Due to the wide variation in the chemistry of adhesives, a test section is always recommended.


Download Helpful Information:


Packaging

CURE & SEAL 30 is packaged in:

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

CURE & SEAL 25 UV EX-SpecChem | The Duke Company

The Duke Company is proud to carry SpecChem products including CURE & SEAL 25 UV EX. CURE & SEAL 25 UV EX is a 25% solids, low VOC, solvent-based cure & seal (ASTM C-1315 Class A)

 

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 


CURE & SEAL 25 UV EX is a VOC compliant nonyellowing, acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. CURE & SEAL 25 UV EX is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance in the OTC/LADCO/ MRPO regions.

APPLICATION

Cure & Seal 25 UV EX dries much faster than standard solvent-based products. Cure & Seal 25 UV EX should not be applied on hot surfaces or in direct sunlight as this could cause rapid evaporation and will not allow the film to form properly. Under these conditions the film may bubble, peel and/or blush. Tip: If spraying Cure & Seal 25 UV EX keep pressure in pump up sprayers as high as possible to ensure a steady and even spray pattern. Maintain the prayer tip near the concrete, within 12 inches.

Curing: 300 – 400 sq ft / gal
Dustproofing and Sealing: 400 – 600 sq ft / gal
Aged concrete: 400 – 600 sq ft / gal

For dustproofing and sealing benefits, apply two coats at 500 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete.

New Concrete: CURE & SEAL 25 UV EX should be applied as soon as the surface water has disappeared and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.

Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and incompatible coatings prior to application. An application of CURE & SEAL 25 UV EX will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain.

CURE & SEAL 25 UV EX is compatible with most carpets, tile and floor covering adhesives. Due to the wide variation in the chemistry of adhesives, a test section is always recommended.


Download Helpful Information:


Packaging

CURE & SEAL 25 UV EX is packaged in:

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

CURE & SEAL 25 UV-SpecChem | The Duke Company

 

The Duke Company is proud to carry SpecChem products including CURE & SEAL 25 UV. CURE & SEAL 25 UV is a 25% solids, low VOC, solvent-based cure & seal.

CURE & SEAL 25 UV is a 25% solids solvent-based cure & seal (ASTM C-1315 Class A compliant).

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 


CURE & SEAL 25 UV is a VOC compliant acrylic nonyellowing polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. CURE & SEAL 25 UV is formulated to provide maximum color stability in a high gloss finish. CURE & SEAL 25 UV is stable under Ultra-Violet light and is suitable for both exterior and interior use.

APPLICATION

Storage: Store material in the original tightly closed containers. Do not allow the accumulation of water, dirt or other contaminants.

Coverage: Ready to use. Do not dilute. Apply with a sprayer or roller in uniform thin films; spray apply for best results. Two thin coats should be applied. Apply the second coat after the first coat has thoroughly dried. Never apply one heavy coat. Avoid puddles. Apply in accordance with recommended coverage rates.

Curing: 300 – 400 sq ft / gal
Dustproofing and Sealing: 400 – 600 sq ft / gal
Aged concrete: 400 – 600 sq ft / gal

For dustproofing and sealing benefits, apply two coats at 500 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete.

New Concrete: CURE & SEAL 25 UV should be applied as soon as the surface water has disappeared and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.

Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and incompatible coatings prior to application. An application of CURE & SEAL 25 UV will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain.


Download Helpful Information:


Packaging

CURE & SEAL 25 UV is packaged in:

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

SpecChem CURE & SEAL 25 EX | The Duke Company

The Duke Company is proud to carry SpecChem products including CURE & SEAL 25 EX. CURE & SEAL 25 EX is a 25% solids, low VOC, solvent-based cure & seal.

CURE & SEAL 25 EX is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

 

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 


CURE & SEAL 25 EX is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance in the OTC/LADCO/MRPO regions.

 

APPLICATION

Cure & Seal 25 EX dries much faster than standard solvent-based products. Cure & Seal 25 EX should not be applied on hot surfaces or in direct sunlight as this could cause rapid evaporation and will not allow the film to form properly. Under these conditions the film may bubble, peel and/or blush. Tip: If spraying Cure & Seal 25 EX keep pressure in pump up sprayers as high as possible to ensure a steady and even spray pattern. Maintain the sprayer tip near the concrete, within 12 inches.

Curing: 300 – 400 sq ft / gal
Dustproofing and Sealing: 400 – 600 sq ft / gal
Aged concrete: 400 – 600 sq ft / gal

For dustproofing and sealing benefits, apply two coats at 500 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete.

New Concrete: CURE & SEAL 25 EX should be applied as soon as the surface water has disappeared and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.

Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and incompatible coatings prior to application. An application of CURE & SEAL 25 EX will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain.

CURE & SEAL 25 EX is compatible with most carpets, tile and floor covering adhesives. Due to the wide variation in the chemistry of adhesives, a test section is always recommended.


Download Helpful Information:


Packaging

CURE & SEAL 25 EX is packaged in:

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

SpecChem – CRYSTAL SHINE Matte | The Duke Company

The Duke Company is proud to carry SpecChem products including Crystal Shine MatteCrystal Shine Matte is a Matte Finish Protective Exterior Sealer.

CRYSTAL SHINE MATTE is a methacrylate cure and sealer developed specifically exterior applications, including exposed aggregate and other decorative concrete surfaces. CRYSTAL SHINE MATTE provides a clear protective coating that produces a subtle, satin (“matte”) finish that highlights the color and texture of surfaces without excessive shine. CRYSTAL SHINE MATTE is ideal for stained concrete, exposed aggregate slabs, walkways, swimming pool decks and walls.

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

SpecChem logo

 


CRYSTAL SHINE MATTE is ideal for stained concrete, exposed aggregate slabs, walkways, swimming pool decks and walls.

BENEFITS:

  • Provides a totally clear membrane for new or old concrete for improved durability.
  • Seals all concrete surfaces, providing a satin (“matte”) appearance and easier clean-up.
  • Dust proofs concrete with a tough, durable film.
  • Will not yellow under ultraviolet exposure.
  • Excellent blush resistance in damp areas.

 

 

APPLICATION

Surface Preparation – The concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent adhesion of CRYSTAL SHINE MATTE.AGITATE WELL BEFORE EVERY USE!

Application to Fresh Concrete – Apply at a uniform coverage by spray or roller at 350-400 sq ft /gal. Product may be sprayed with a hand held “pump-up” sprayer or an airless industrial sprayer. If roller applied, use a short napped solvent resistant sleeve. When an extra high gloss is desired or on especially porous surfaces, another thin application can be applied the next day at 400 sq-ft/gal.

Sealing Existing Concrete – The surface must be thoroughly cleaned and dried before applying Crystal Shine Matte. Pressure washing with a strong alkaline detergent to remove dirt, waxes and oils is recommended. Acids will not sufficiently clean or remove dirt, curing compounds, or old sealer from concrete. Worn or porous areas may need a second application for uniform sealing and appearance. Allow 24 hours before 2nd application of sealer. In general, multiple thin coats (350 – 400 sq ft/ gal) will provide a harder, more durable finish than a single heavy application. Dry time will be influenced by both temperature and humidity.

 


Download Helpful Information:


Packaging

Crystal Shine Matte is packaged in:

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)
  • 1 gallon cans (4 to a case) (3.8 L)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

SpecChem – CRYSTAL SHINE | The Duke Company

The Duke Company is proud to carry SpecChem products including CRYSTAL SHINE. CRYSTAL SHINE is a high gloss lacquer-based sealer.

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

SpecChem logo

 

 


CRYSTAL SHINE is a lacquer sealer developed for interior and exterior applications, to bring out the radiance and luster of exposed aggregate and other decorative concrete surfaces with a durable protective finish. CRYSTAL SHINE is ideal for stained concrete, exposed aggregate slabs, walkways, swimming pool decks and walls. CRYSTAL SHINE is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance in the OTC/LADCO/MRPO regions. Also available in a high-solids version (CRYSTAL Shine HS).

BENEFITS:

  • Provides a crystal clear membrane for new or old concrete for improved durability.
  • Seals all concrete surfaces, providing a glossy appearance and easier clean-up.
  • Dust proofs concrete with a tough, durable film.
  • Will not yellow under ultraviolet exposure.
  • Excellent blush resistance in damp areas.

 

APPLICATION

Surface Preparation – The concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent adhesion of CRYSTAL SHINE.

Application to Fresh Concrete – . Apply at a uniform coverage by spray at 250-350 sq ft /gal. Product may be sprayed with a hand held “pump-up” sprayer or an airless industrial sprayer. Best result are achieved when spray applied. If roller applied, use a short napped solvent resistant sleeve and avoid entrapping air (bubbles)

When an extra high gloss is desired or on especially porous surfaces, two applications are recommended . Allow the first application to dry for 1-3 hours or until surface is dry to the touch.

 


Download Helpful Information:


Packaging

CRYSTAL SHINE is packaged in:

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)
  • 1 gallon cans (4 to a case) (3.8 L)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

SpecChem – CRYSTAL REZ™ | The Duke Company

The Duke Company is proud to carry SpecChem products including CRYSTAL REZ. CRYSTAL REZ is a Clear resin water-based emulsion curing compound CRYSTAL REZ is formulated to provide an effective curing membrane that will dry to a clear (non-yellowing) membrane. CRYSTAL REZ will provide a more cost effective alternative to cure & seals without the unsightly yellow/amber appearance of other dissipating resins. May contribute to LEED credits

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 


SpecChem logo

 

 

 

 


CRYSTAL REZ will provide a more cost effective alternative to cure & seals without the unsightly yellow/amber appearance of other dissipating resins. May contribute to LEED credits

BENEFITS:

  • Dries to a clear membrane
  • No unsightly yellow / amber residue
  • Ensures proper curing, resulting in stronger, more wear resistant concrete
  • Helps minimize dusting
  • Once cure membrane dissipates or has been removed, substrate is compatible with most paints, sealers, coating and floor covering adhesives

APPLICATION

Agitate thoroughly before use. Application equipment must be clean and free of foreign materials.

CRYSTAL REZ appears milky white in the container and during application, but will dry to a clear film. A spray application is the preferred method. Application temperatures above 40o F are recommended. Areas that are to be caulked should be masked. Do not pond or puddle. Coverage will vary depending on the texture and porosity of the concrete. Apply at a rate of 200-400 ft2 /gal immediately after final trowel (or stripping of forms).

CRYSTAL REZ is formulated as a resin type cure. The rate of physical breakdown is dependent upon climatic conditions, the rate of application, exposure to ultraviolet light and physical wear. Under normal conditions, chemical and physical breakdown will start in 4-6 weeks.

Residual CRYSTAL REZ may be removed with SpecChem Citrus Cleaner and a dry abrasive or sanding pad.

The use of CRYSTAL REZ does not eliminate the need to properly prepare the surface in accordance with the written instructions for the application of secondary toppings or coatings. Prior to product drying, tools and equipment may be cleaned

 


Download Helpful Information:

SpecChem-CreteAway-SDS

Crete-Away-Tech-Sheet


Packaging

CRYSTAL REZ is packaged in:

55 gallon drums (208.2 L)

5 gallon pails (18.9L)



The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Watertown NY

Oswego NY

Amsterdam NY

Plattsburgh NY

Henrietta NY

Ellicottville NY

Horseheads NY

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

SpecChem – CRETE-AWAY™ | The Duke Company

The Duke Company is proud to carry SpecChem products including CRETE-AWAY™. CreteAway is a water based, bio-degradable concrete remover. It is a chemically active liquid formulated to soften and remove concrete build up from concrete tools and equipment.

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

SpecChem barrel

 


CRETE-AWAY™ is designed to help avoid the damaging effects of sandblasting, bush-hammering and jack-hammering hardened concrete from equipment.

BENEFITS:

  • Ready-to-use – No mixing required.
  • Bio-degradable, non-corrosive, low-odor, water based, won’t contaminate ground water
  • Reduces labor costs and equipment damage normally associated with removing built up, hardened
  • Prevents damage to equipment caused by physica removal such as sandblasting or hammering.
  • O.C. compliant.
  • Will not harm most painted metal surfaces (i.e. automobiles).
  • Dissolves concrete and mortar on tools, equipment and forms.
  • Safely etches concrete floors.

APPLICATION

Brush or spray apply ready-to-use CRETE-AWAY™ to the hardened concrete surface or mortar to be removed at approximately 75 ft2 /gal. (1.8 m2 /gal.) If possible, immersion is the best application method. A light foaming action will occur. Allow to soak and agitate. After the concrete has softened, apply an additional application and allow this to remain on the surface for approximately 10 minutes. Remove concrete with a scraper.

If additional concrete remains, subsequent applications may be necessary. The final application may be removed by power washing. Concrete build up of more than 1/4” (6 mm) may require multiple applications. If treated concrete resets prior to removal, apply additional CRETE-AWAY™ to re-soften. Leave the fresh application on for 10-15 minutes, then remove softened concrete as stated above.

 


Download Helpful Information:


Packaging

CRETE-AWAY™ is packaged in:

  • 275 gallon totes (1040.9 L)
  • 55 gallon drums (208.2 L) 5 gallon pails (18.9L)
  • 1 gallon jugs (3.8 L) (4 to a case)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

SpecChem – CONCRETE GLUE | The Duke Company

The Duke Company is proud to carry SpecChem products including CONCRETE GLUE. CONCRETE GLUE is a ready to use, rewettable polyvinyl acetate (PVA) emulsion admixture and bonding agent which bonds new concrete, underlayments, masonry, stucco, terrazzo and Portland cement/sand mixes to horizontal and vertical concrete surfaces. Recommended for interior and/or exterior use not subjected to constant moisture, hydrostatic pressure or continuous water saturation. Actual VOC Content = 0 grams/liter

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)

 

 

SpecChem barrel

 


BIO STRIP WB CONCENTRATE is a re-emulsifiable Bonding Agent, Admixture and Underlayment Primer

BENEFITS:

  • Re-emulsifiable/rewettable; VOC compliant
  • Excellent bonding agent/superior adhesive strength
  • Admixture drastically increases durability, adhesion and curing of cement base mortars and stucco
  • Can be used when there is a delay between primer application and subsequent topping or underlayment

 

APPLICATION

Primer/Bonding agent for underlayments, plaster and stucco: Surfaces to which CONCRETE GLUE is to be applied must be clean, structurally sound, and free of water, soluble materials, or contaminants. Predampen clean surfaces before application.

CONCRETE GLUE has a coverage rate of 150-250 square feet per gallon. The coverage rate varies with the porosity of the surface. Apply with a brush, broom or sprayer and brush into the surface. Drying time is two to three hours at 70oF.

CONCRETE GLUE will remain slightly tacky when dry. Accumulation in low areas should be wiped up. Poor ventilation will delay normal drying time. Fans will help increase air circulation to speed drying time. Under normal conditions, CONCRETE GLUE can be applied up to 24 hours before installation of underlayment toppings. All areas subject to application must be clean of all foreign materials. Traffic should be kept to a minimum. Very porous surfaces will require two applications of CONCRETE GLUE. Allow two to three hours between applications. If a continuous film is not achieved on the surface, reapply CONCRETE GLUE.

Bonding admixture for cement-based mortars/stucco:
Replace one half of mixing water with CONCRETE GLUE. Mix as usual. Properties achieved when using CONCRETE GLUE as an admixture will depend on composition of the stucco/mortar . Verify suitability in each application prior to application. Modifying with CONCRETE GLUE will improve the adhesion and durability of cement based mortars/toppings.

 


Download Helpful Information:


Packaging

CONCRETE GLUE is packaged in:

  • 55 gallon drums(208.2 L)
  • 5 gallon pails (18.9L)
  • 1 gallon jugs (3.8L) (4 to a case)


The Duke Company
 can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

         

              Quote for Rock Salt & Packaged Ice Melts from the Duke Company         

           (585) 292-9870  (Rochester NY)

          (607) 347-4455  (Ithaca NY)

          (585) 335-5970 (Dansville NY)


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski

Contact Us

Get Help Now

Our Team Is Standing By

Building & Ice Control Products

Buy Used Equipment

Used Equipment

A comprehensive line of Used Equipment is available for purchase. Our Used Equipment specialists would be glad to assist you.

A+ Reputation

Great Work Ethic!

"Didn't know the Duke Co. before, but now I do. Great employee." - Prospective Customer from Lancaster

Thank You!!

"Duke provides the products, service, knowledge, and logistics that keep our company competitive! Thank you and don't change a thing!" - Brian K.

Leave A Review
See All Testimonials

Parts & Service Questions?

Parts & Service

We can service your equipment and order parts for you. Our Parts & Service professionals are available to assist you.

Training & Advice

 Telehandlers Genie GTH 844 | The Duke Company

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional […]

Read More...

Flagro FVO 1000TR Indirect Heater | The Duke Company

The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional […]

Read More...

Read All

Recent Videos

Video – How to Start a Handheld Hydraulic Hammer

Video – How to Start a Handheld Hydraulic Hammer

Are you looking for a helpful video on how to start a handheld hydraulic hammer?   This excellent […]

Duke Company Rock Salt Distribution in Upstate NY, NYC and New York State

Video Highlights – Duke Company Rock Salt Distribution in Upstate NY, NYC and New York State

The Duke Company can help keep you warm and your property clear, safe and accessible this Winter. This […]

View All

BUY USED EQUIPMENT NOW