The Duke Company is proud to carry SpecChem products including Cure & Seal 30. Cure & Seal 30 is a 30% solids solvent-based cure & seal (ASTM 1315 class B compliant).
The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
CURE & SEAL 30 is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.
APPLICATION
Storage: Store material in the original tightly closed containers. Do not allow the accumulation of water, dirt or other contaminants.
Coverage: Ready to use. Do not dilute. Apply with a sprayer or roller in uniform thin films; spray apply for best results. Two thin coats should be applied. Apply the second coat after the first coat has thoroughly dried. Never apply one heavy coat. Avoid puddles. Apply in accordance with recommended coverage rates.
Curing: 300 – 400 sq ft / gal
Dustproofing and Sealing: 400 – 600 sq ft / gal
Aged concrete: 400 – 600 sq ft / gal
For dustproofing and sealing benefits, apply two coats at 500 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete.
New Concrete: CURE & SEAL 30 should be applied as soon as the surface water has disappeared and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.
Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and incompatible coatings prior to application. An application of CURE & SEAL 30 will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain. CURE & SEAL 30 is compatible with most carpets, tile and floor covering adhesives. Due to the wide variation in the chemistry of adhesives, a test section is always recommended.
Download Helpful Information:
Packaging
CURE & SEAL 30 is packaged in:
- 55 gallon drums (208.2 L)
- 5 gallon pails (18 L)
The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:
- Watertown NY
- Oswego NY
- Amsterdam NY
- Plattsburgh NY
- Henrietta NY
- Ellicottville NY
- Horseheads NY
Sign-up for the Duke Company’s Alerts
Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.
Industries we serve:
Construction
High Rises, |