Deco Shine Brown EX – SpecChem | The Duke Company

 

SpecChem Logo 2

 

Consider The Duke Company your partner that can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote. We are proud to carry SpecChem products including Deco Shine Brown EX.

 

DUKE COMPANY - CONTACT US

 

Or call the  Duke Company at:

585-292-9870  (Rochester NY)

607-347-4455  (Ithaca NY)

(585) 335-5970 (Dansville NY)

VISA AMEX MASTERCARD DISCOVER


Deco Shine Brown EX is a low VOC solvent-based pigmented Protective Sealer. DECO SHINE BROWN EX is a light brown pigmented sealer that enhances and tints the cement paste of a Merrimack Brown exposed aggregate surfaces.

DECO SHINE BROWN EX is a VOC compliant brown pigmented methacrylate sealer to protect exterior applications, including exposed aggregate and other decorative concrete surfaces. DECO SHINE BROWN EX is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance in the OTC/LADCO/MRPO regions. DECO SHINE BROWN EX is a light brown pigmented sealer that enhances and tints the cement paste of a Merrimack Brown exposed aggregate surfaces.

 

 


Application

DECO SHINE BROWN EX dries much faster than standard solvent–based product. DECO SHINE
BROWN EX should not be applied on hot surfaces or in direct sunlight as this could cause rapid evaporation and will not allow the film to form properly. Under these conditions the film may bubble, peel and/or blush. Tip: If spraying DECO SHINE BROWN EX keep pressure in pump up sprayers as high as possible to  ensure a steady and even spray pattern. Maintain the sprayer tip near the concrete surface, within 12 inches.

Agitate well before every use! Apply with a sprayer in uniform thin films; spray apply for best results. Two thin coats should be applied. Apply the second coat after the first coat has thoroughly dried. Never apply one heavy coat. Avoid puddles. Apply in accordance with recommended coverage rates.

Curing: 300 – 400 sq ft / gal
Dustproofing and Sealing: 400 – 600 sq ft / gal
Aged concrete: 400 – 600 sq ft / gal

For dustproofing and sealing benefits, apply two coats at 500 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete.
New Concrete: DECO SHINE BROWN EX should be applied as soon as the surface water has disappeared
and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.
Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and
incompatible coatings prior to application. An application of DECO SHINE BROWN EX will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain.


Download Helpful Information:


Packaging

Deco Shine Brown EX is packaged in:

  • 5 gallon pails (18 L)

The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

DUKE COMPANY - CONTACT US

Or call the  Duke Company at:

585-292-9870  (Rochester NY)

607-347-4455  (Ithaca NY)

(585) 335-5970 (Dansville NY)

 


The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:

Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski