The Duke Company is proud to carry SpecChem products includingFinal Finish. Final Finish is a Concrete resurfacing mortar. FINAL FINISH™ is a one-component, rapid hardening, polymer modified concrete resurfacing mortar for smoothing, resurfacing, rubbing, and restoring concrete surfaces. FINAL FINISH™ offers a unique long pot life but rapid hardening performance on the substrate to minimize
waste and labor.
FINAL FINISH™ offers superior durability for all interior and exterior, horizontal, vertical and overhead concrete applications.
Ideal as a trowel down underlayment and for repairs from a true feather edge up to 1/4.” FINAL FINISH™ can also be used as a skim patch or trowel-down underlayment for horizontal repairs subjected to light traffic.
The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
Features and Benefits
• Ultra Fine – no sand
• Single Component – Just add water
• Rich smooth consistency
• Long Pot Life
• For Interior or Exterior use
APPLICATION
Surface Preparation: The concrete must be sound and free of all foreign material, including oil, grease, dust, laitance or other surface contaminants. For best results, porous, or very dry/hot substrates should be predampened with no standing water on the surface (SSD).
Mixing: Mix by hand or with a low speed drill. Add recommended amount of water into the container, followed by slowly adding the FINAL FINISH™ powder. Suggested water addition for FINAL FINISH™ is approximately 30% by weight or 11 to 11.5 pints per 40 lb pail.
Mix 2-3 minutes until a uniform, smooth consistency is achieved. Covering the mixing container with a damp rag will extend the pot-life up to 3 hours @ 72F. Do not over mix or retemper.
Placement: When placing with a trowel or sponge float, it maybe necessary to use pressure to force FINAL FINISH™ into cracks, voids and honey-combed areas. FINAL FINISH™ retains its moisture and will spread easily. For applications in excess of 1/4” use SpecSmooth.
Placement – Walls: When applying FINAL FINISH™ to walls, first build up low areas and fill voids with SpecPatch or SpecSmooth. Allow to harden. Apply a thin application of FINAL FINISH™ over entire surface area. Work in with a sponge float or trowel. If necessary, a second coat maybe applied before the first coat has cured fully. Extreme weather conditions should be avoided, especially heat and wind.
Curing: FINAL FINISH™ will reach its final cure in twenty-four hours. Protect from rain or excess water until cured.
COVERAGE
Coverage of 40 lbs: approx 120 sq-ft @ 1/16”
Download Helpful Information:
Packaging
FINAL FINISH is packaged in:
- 15 lb pails
- 40 lb bags (60 bags per pallet)
- 40 lb pails (36 pails per pallet)
The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:
- Watertown NY
- Oswego NY
- Amsterdam NY
- Plattsburgh NY
- Henrietta NY
- Ellicottville NY
- Horseheads NY
Sign-up for the Duke Company’s Alerts
Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.
Industries we serve:
Construction
High Rises, |