Looking for Building Supplies for the Rehabilitation of Cast in Place Concrete? | Building Supplies | Concrete | CSI 03 0000

• Very Rapid hardening, repair mortar.
  • Very rapid hardening as defined by ASTM C 928
  • Epoxy coatings can be applied as early as 4 hours at 73o F (23o C)
• One-part, cementitious, very rapid hardening, early strength gain, cementitious, patching mortar for concrete.

• Two-component, polymer-modified, Portland cement-based, fast-setting, screed mortar.
• High performance repair mortar for horizontal, vertical and overhead surfaces in form and pour applications.
• Offers the additional benefit of Sika FerroGard®-901, a penetrating corrosion inhibitor included in its formulation.
• Extremely low shrinkage proven by four industry standard test methods
• High compressive and flexural strengths
• Increased freeze/thaw durability and resistance to deicing salts
• Usage:
  • On grade, above grade, and below grade concrete
  • Horizontal surfaces (e.g. for spall repairs on flat work, or as an overlay): pour and screed
  • Vertical and overhead surface repairs when formed and poured, or formed and pumped with an appropriate pump
  • Structural repair material for water and wastewater treatment plants, parking facilities, industrial plants, walkways, bridges, tunnels, dams, abutments, floors and balconies
  • Approved for repairs over cathodic protection systems
  • Free flowing repair mortar for hard-to-reach areas
  • Filler for voids and cavities
  • Repair of substrates such as concrete, mortar, and masonry
• Advantages:
  • Extremely low shrinkage proven by four industry standard test methods
  • High compressive and flexural strengths
  • Increased freeze/thaw durability and resistance to deicing salts
  • Increased density – improved carbon dioxide resistance (carbonation) without adversely affecting water vapor transmission (not a vapor barrier)
  • Enhanced with Sika FerroGard®-901, a penetrating corrosion inhibitor – reduces corrosion even in the adjacent concrete

• Fast setting, one component, ready-to-use repair mortar for vertical and overhead applications using specialty cement blends.
• A low dust formula also available as a separate item.
• Minimal time required between lifts.
• Fast finishing time
• Time/labor-saving material; application up to 3″ (76.2 mm) on vertical surfaces in one layer
• Usage:
  • Fast repairs to overhead and vertical concrete and mortar surfaces on grade, above and below grade.
  • As a repair material for building facades, parking structures, industrial plants, bridges, etc.
  • As a fast setting repair material for new construction defects.
• Advantages:
  • Minimal time required between lifts.
  • Fast finishing time
  • Time/labor-saving material; application up to 3″ (76.2 mm) on vertical surfaces in one layer
  • Easy to use; just add water
  • High bond strength ensures excellent adhesion
  • High early and ultimate strength
  • Increased freeze/thaw durability and resistance to deicing salts
  • Suitable for exterior and interior applications.
  • Overhead thickness up to 2″ (50 mm)
  • Fiber reinforced and polymer modified
  • Contains corrosion inhibitor
  • Use in cold temperatures with SikaQuick WinterBoost (20° – 45 °F)
  • Low dust version available

SikaTop®-122 Plus is a two-component, polymer-modified, portland cement based, fast-setting, trowel-grade mortar. It is a high performance repair mortar for horizontal and vertical surfaces and offers the additional benefit of Sika FerroGard® 901, a penetrating corrosion inhibitor.

SikaTop®-123 Plus is a two-component, polymer-modified, Portland cement-based, fast-setting, non-sag mortar. It is a high performance repair mortar for vertical and overhead surfaces and offers the additional benefit of Sika FerroGard® 901, a penetrating corrosion inhibitor included in its formulation.