The Duke Company is proud to carry SpecChem products including RevCrete™.
RevCrete™ is a one-component, polymer modified concrete repair / resurfacing mortar for smoothing, resurfacing, and restoring concrete surfaces. REVCRETE™ offers superior durability for all interior and exterior concrete applications and can be diamond polished
to a dense decorative overlay. REVCRETE™ is available in 2–formulations; RevCrete™-Fine is blended with fine sands for a smoother finish on repairs from a feather to 1/2”. RevCrete™-Coarse is blended with fine/coarse sands for a broom finish on repairs from 1/8” to 1.5”.
The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
Application
Surface Preparation: The concrete must be sound and free of all foreign material, including oil, grease, dust, laitance or other surface contaminants. All surfaces to be repaired should be high pressure water blasted to produce an open rough surface profile. Surface must be
misted/pre-dampened with water in a saturated-surfacedry (SSD) condition with no standing water on the surface. Mixing: Mix by hand or with a low speed drill. Add recommended amount of water into the container, followed by slowly adding the REVCRETE™ powder. Suggested water addition for REVCRETE™ is approximately 4 to 5 pints per 40 LB bag (10.4% -13.0% by weight) depending on desired consistency. Mix 2-3 minutes. Mix only what can be applied within the 25 minute working time. Do not mix longer than 3 minutes. Do not over water, over mix or retemper.
Placement: When placing with a trowel, broom or squeegee, it maybe necessary to use pressure to force REVCRETE™ into cracks, voids and honey-combed areas. REVCRETE™ retains its moisture and will spread easily. For deep applications, apply in layers and allow five to six hours between applications. Allow the moisture to leave the surface and allow the RevCrete™ to stiffen before applying the final finish and texture. Extreme weather conditions should be avoided, especially heat and wind. REVCRETE™ may be spray applied with a hopper gun
CURING: REVCRETE™ will reach its final cure in twenty-four hours. Protect from rain or excess water until cured. When properly stored in a cool, dry area, shelf life is 12 months. Excessive temperature differential and/or high humidity can shorten the shelf life expectancy.
Polymer-modified concrete repair / resurfacing mortar REVCRETE™
Download Helpful Information:
Packaging
- 40 lb pails (36 pails per pallet)
- 40 lb bags (60 bags per pallet)
Coverage:
Approx 60-70 sq-ft @ 1/16” RevCrete™-Fine
Approx 16-18 sq-ft @ 1/4” RevCrete™-Coarse
Actual coverage will depend on substrate texture and application method
The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:
- Watertown NY
- Oswego NY
- Amsterdam NY
- Plattsburgh NY
- Henrietta NY
- Ellicottville NY
- Horseheads NY
Sign-up for the Duke Company’s Alerts
Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.
Industries we serve:
Construction
High Rises, |