The Duke Company is proud to carry SpecChem products including SC Cure 500®. SC CURE 500® is a Concrete Curing Compound. SC Cure 500® penetrates and forms a temporary membrane to cure, densify, harden and dustproof concrete essential for proper strength development. Should SC CURE 500® be over applied or left to dry on the surface of hard trowel concrete surfaces, the surface membrane becomes brittle and is easily removed with a stiff broom or light abrasion. Once the surface has been cleaned, lithium hardeners can be applied within 7 days. SC CURE 500® meets the moisture retention of ASTM C-309 on hard-troweled concrete surfaces.
Benefits:
- Cost-effective alternative to water cure or resin based curing compounds
- Compatible with integrally colored concrete
- Non-yellowing, will not stain nor alter natural color concrete
- Excess cure membrane is easily removed
- Non-flammable/USDA accepted/odorless
- Will not inhibit adhesion of secondary coatings, topping, or adhesives designed for concrete
- Sealer/Densifiers can be applied in 5-7 days
- Contains VOC’s = 0 grams/liter
- Certified for use to cure potable water structures
The Duke Company can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
Application
COVERAGE:
Curing, Sealing, Hardening and Dustproofing: Hard Troweled Finish: 500-600 sq ft / gal
Broom or Float Finish: 300-400 sq ft / gal
Vertical Surface: 400-500 sq ft / gal
Extend application rate to 1000-1200 sq-ft per gal on extremely hard trowelled, burnished concrete floors (ie Wal Mart, Kohl’s etc)
The above rates are approximate. Exact coverage depends upon the porosity of the concrete as well as the job requirements.
Place concrete, finish, cut control joints and thoroughly remove all saw cutting residue before cure application.
Spray apply in a fine mist and immediately spread with a microfiber applicator pad. Over-application and puddling may leave a clear-milky membrane which is removed with a stiff broom, screen or flushing the surface with water and scrubbing. Spraying and spreading with
applicator pad provides superior results. Application temperatures 40oF to 90oF.
Download Helpful Information:
The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.
(585) 292-9870 (Rochester NY)
(607) 347-4455 (Ithaca NY)
(585) 335-5970 (Dansville NY)
The Duke Company ships nationwide and throughout New York, or contact us for convenient pick-up locations including:
- Watertown NY
- Oswego NY
- Amsterdam NY
- Plattsburgh NY
- Henrietta NY
- Ellicottville NY
- Horseheads NY
Sign-up for the Duke Company’s Alerts
Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.
Industries we serve:
Construction
High Rises, |