The Atlas Copco LPD T Post Driver

The Atlas Copco LPD T Post Driver

Atlas Copco LPD T Post Driver

The Atlas Copco LPD T post driver is available in Upstate NY from the Duke Company.

The push-down trigger system is perfect for driving light fences, tent stakes and ground rods. A remote valve gives you extra reach.

The LPD T is the perfect all-round driver. It has an built-in anvil and a front end that allows for a quick mount of adaptors and bushings for small diameter rods. Special composite guiding bushings called PTFE protects the zinc or copper surface from the driving rod. The sliding surface of the composite material permits smooth, low-friction operation.

The LPD T comes with a standard 2 foot quick- release coupling tail hose. It has a build-in start/stop trigger that the you can activate directly on the driver.

The post drivers accept a high back pressure in the return line, which allow you to operate from almost any hydraulic outlet – even on skid steers with high return pressure systems – or when extremely long hoses are needed.


The post drivers provides stable, powerful, high speed driving for a variety of post sizes.

short poles

The driver has a built in on/off valve for short pole driving.

Specifications for the Atlas Copco LPD T drive post:
Activation type By trigger lever
Hydraulic system Open centre
Service weight lb 75
Oil flow gpm gpm 5 – 8
Working pressure psi 1523 – 2031
Impact rate blows/min 1,680 (8 gpm)
Post/rod diameters in 2 – 4
Vibration level 3 axes (ISO 28927-10) 20 lpm m/s²


Sound power level guaranteed (2000/14/EC) Lw dB(A) 115
Sound pressure level (ISO 11203)  m/s² Lw dB(A) Lp, Lp, r=1m dB(A) 102
EHTMA class C/D
Part number 1801 4040 02

*Please note, subject to equipment availability and seasonal demands, specific makes and models of rental equipment may not be available for rent or sale.  The Duke Company will make every attempt to equip you with the right rental equipment and tools that will enable you to accomplish your project goals.

Contact The Duke Company for Expert Advice & Exceptional Customer Service!

Our team is always available to assist you!

The Duke Company is a leading rental equipment, building supply, construction material & ice control products company in Upstate NY.  We have locations in Rochester NY, Ithaca NY, Dansville NY and Auburn NY.

As a locally-owned company, The Duke Company understands your standards of excellence and what it takes for you to serve your customers!

Rent Equipment in Rochester NY from The Duke Company

Rochester: (585) 292-9870

•  Hours: Monday – Friday from 7 am – 5 pm EST & Saturday from 8 am – 12 pm EST.

•  Address: 299 Jefferson Road, Rochester, NY  14623

Rochester Salt Facility:  (585) 292-9870

•  Hours: Monday – Friday: 5 am – 5 pm | Saturday & Sunday: 5 am – 10 am

•. Weather Events: Open Extended Hours

Ithaca New York Equipment Rental and Building Products - The Duke CompanyIthaca: (607) 347-4455

•  Hours: Monday – Friday from 7 am – 5 pm EST.

•  Address: 7 Hall Road, Ithaca NY  14850



Duke Company Rents Equipment in Danville NYDansville: (585) 335-5970

•  Hours: Monday – Friday from 7 am – 5 pm EST.
•  Address: 10131 Poags Hole Road, Dansville, NY 14437



The Duke Company - Auburn NY Equipment RentalAuburn:  (315) 515-3600

•  Hours: Monday – Friday from 7 am – 5 pm EST.

•  Address:480 Grant Avenue, Auburn, NY 13021