RepCon® V/O – SpecChem | The Duke Company

 


Consider The Duke Company your partner that can assist you with all your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery. For exceptional customer service & the fastest delivery in Upstate New York, call us for a prompt rental quote.

 

DUKE COMPANY - CONTACT US

Or call the  Duke Company at:

585-292-9870  (Rochester NY)

607-347-4455  (Ithaca NY)

(585) 335-5970 (Dansville NY)

VISA AMEX MASTERCARD DISCOVER

 

The Duke Company is proud to carry SpecChem products including RepCon® V/O

RepCon® V/O is a Single component polymer-modified concrete repair mortar. A single component, polymer modified, fiber reinforced concrete repair mortar with integral corrosion inhibitor for use in a variety of vertical and overhead repair applications. RepCon® V/O incorporates the latest in polymer technology offering superior durability, performance and ease of application in industrial, commercial, and infrastructure (D.O.T.) applications

 


 

BENEFITS:

  • One component dry polymer-modified, just add water
  • Dry polymer technology for excellent freeze thaw durability
  • Hand-applied or spray applied for large projects
  • Easy to apply/finish consistency up to 2” per lift
  • Concrete-gray in color
  • Designed for vertical and overhead repairs
  • Fiber-reinforced for added strength
  • Contains integral corrosion inhibitor

 

Application

Surface Preparation: The concrete must be sound and free of all foreign material, including oil, grease, dust, laitance or other surface contaminants. For maximum durability, saw cut the perimeter of the repair 1/8” deeper than the depth of the repair, creating a notched, reinforced edge. Mechanically abrade the surface by an engineered approved method in accordance with ICRI 310.2 Guideline
to a minimum CSP 5. All concrete surfaces to be repaired must be in a saturated-surface-damp (SSD) condition with no standing water on the surface. Priming/Scrub Coat: Thoroughly clean all exposed steel reinforcing of rust and coat with SpecPrep SB. Prepared concrete must be SSD and primed with a spray or brush coat of SpecPrep SB and the repair mortar applied wet on wet or up to the recommended open
time (see SpecPrep SB technical data sheet). As an alternative, apply a scrub coat of the properly mixed repair mortar by scrubbing a thin layer into the predampened substrate with a stiff brush. Place the repair mortar immediately before the bond coat dries. Mixing: Mix 6.25 – 6.75 pints (depending on desired consistency) of clean water per 50 pound bag of material. Mix with a low speed drill. Add recommended
amount of clean water into the container, followed by the REPCON® V/O. Mix 2 to 3 minutes. Mix only what can be applied within the setting period. Placement: Trowel REPCON® V/O firmly into the prepared area, ensuring intimate contact with the bonding surface. Use slightly more material than is needed and roughly shape during placement. After the initial set, when REPCON® V/O is surface hard, shave the material to the desired final shape using a steel trowel. Maximum depth of neat repair mortar is 2” for each lift. Additional lifts can be placed after the original lift has achieved set. The original lift should be left with a rough surface to improve bond between lifts.
Finishing/Curing: Finish the repair material to the desired texture to match the surrounding concrete. REPCON® V/O is self-curing under most conditions. In severe drying conditions, use an ASTM C-309 compliant, water based SpecChem curing compound.


Download Helpful Information:


Packaging

  • 50 lb bag
  • 50 lb plastic pail

 

Yield per 50 lb unit = .43 cu-ft


*Please note, subject to equipment availability and seasonal demands, specific makes and models of rental equipment may not be available for rent or sale. The Duke Company will make every attempt to equip you with the right rental equipment and tools that will enable you to accomplish your project goals. Please contact the Duke Company in Rochester at (585) 292-9870 and Ithaca at (607) 347-4455 to check for the latest availability.


The Duke Company can assist you with your construction needs. We offer expert advice from our highly rated customer service. Furthermore, we offer the best values and fast delivery.

DUKE COMPANY - CONTACT US

Or call the  Duke Company at:

585-292-9870  (Rochester NY)

607-347-4455  (Ithaca NY)

(585) 335-5970 (Dansville NY)

 


The Duke Company ships nationwide and throughout New York including:


Sign-up for the Duke Company’s Alerts

Text ‘DUKESALT’ to ’55469’ to receive text messages regarding our hours, extended hours, schedule changes and discount opportunities.

Industries we serve:

Construction

High Rises,
Bridges,
Residential & Commercial
high-rise construction, power plants,
tunnels,
mining
Building Maintenance

By David Szydlowski