The Atlas Copco LCD 1500 core drill is available in Upstate NY from the Duke Company.
The Atlas Copco hydraulic core drills are both safe and powerful.
Due to the hydraulic control of the drill torque, these core drills give very low kickback should drill bits jam. Core drills are used by professionals in a wide range of applications including building renovation and utility works; including, drainage installation, sewer and water pipes, core sampling (in asphalt roads), plus cable and ventilation ducts where large and deep holes are needed.
The core drills offer spark-free operation – since there are no electrical components – and so can be used inside buildings and even underwater. With a standard round, 2.36 in front-end, you can use Atlas Copco core drills with the majority of commonly available drill stands.
Features & benefits
- High power to weight ratio
- Low vibrations
- Low kick-back
- Hydraulic torque control
- Fits in standard drill stands
- Closed hydraulic circuit
- Comes in carrying steel case as standard
- Safe handheld drilling in reinforced concrete and asphalt up to 200 mm diameter in confined spaces, for ventilation, heating, gas piping and other installations
- Works efficient also in underwater applications
Specifications for the Atlas Copco LCD 1500 core drill:
|Weight (incl hoses)||lb||20|
|Service weight (incl hoses and Ø 112 mm tool)||lb||29|
|Length (without drill)||in||16|
|Working pressure||psi||1160 – 2495|
|Drill diameter||in||1/2 – 3|
|Thread female (drive shaft) 1||in||1/2 BSP|
|Vibration level 3 axes (ISO 28927-5), 20 lpm 2||m/s2||2.7|
|Sound pressure level (ISO 11203) 2||Lp, r=1m dB(A)||<70|
|Part number||1806 1014 39|
*Please note, subject to equipment availability and seasonal demands, specific makes and models of rental equipment may not be available for rent or sale. The Duke Company will make every attempt to equip you with the right rental equipment and tools that will enable you to accomplish your project goals.
Contact The Duke Company for Expert Advice & Exceptional Customer Service!
Our team is always available to assist you!
The Duke Company is a leading rental equipment, building supply, construction material & ice control products company in Upstate NY. We have locations in Rochester NY, Ithaca NY, Dansville NY and Auburn NY.
As a locally-owned company, The Duke Company understands your standards of excellence and what it takes for you to serve your customers!
• Hours: Monday – Friday from 7 am – 5 pm EST & Saturday from 8 am – 12 pm EST.
• Address: 299 Jefferson Road, Rochester, NY 14623
Rochester Salt Facility: (585) 292-9870
• Hours: Monday – Friday from 7 am – 5 pm EST.
• Address:480 Grant Avenue, Auburn, NY 13021